Click on the images above & below for larger views of Go-Go
Our third kit, Go-Go
Dancer, is a 30-watt electric-powered, sport park flyer. Powered
by a small CD ROM brushless motor and a 2 cell 700 mAh LiPoly
battery, Go-Go Dancer will give you spirited performance at a
very affordable price. Building a Go-Go Dancer laser-cut kit and
a CD-ROM brushless motor kit is a great way to enjoy this sport.
Wing Span: 26”
Wing Area: 163 sq. in.
Weight: 6.8 oz.
Wing Loading: 6 oz. per sq. ft.
Total Input Watts: 30 or
75 watts per pound
Thrust: 7 oz.
Top Speed: 35 mph
GoBrushless CD-ROM Motor Kit 16T
2S1P LiPoly 640 mAh Battery
CC Thunderbird 9 Controller w/BEC
6” x 4” Maxx E-Flyer Prop
4 Channel Radio/Transmitter
FMA M5 Receiver
3 Hitec HS-45HB Servos
Nelson LiteFILM Covering or
Ultracoat Lite Covering
The Go-Go Dancer Design
Go-Go Dancer is an original kit
designed for modelers with an interest in electric-powered airplanes
capable of park flying and sport aerobatics. Go-Go Dancer was
designed from the beginning for lightweight brushless CD-ROM
and LiPoly cells. This airplane makes use of strong, lightweight
design and construction, which improves electric-powered flight
performance and duration. Using the suggested motor and cells,
Go-Go Dancer weighs about 7 oz. ready-to-fly. Go-Go Dancer was
designed to fly a wide speed range and handle windier conditions
than most parkflyers. Aerobatics, from very tight maneuvers
loops, slow rolls, snaps, and stall turns
are possible with Go-Go Dancer. Go-Go Dancer is very stable,
if trimmed out right, will almost land itself. Go-Go Dancer is
controllable and flies smoothly even in 10 mph winds, yet slows
down and land, like a feather. Go-Go Dancer is a great-flying
electric powered model that flies predictably - not your typical
"flip-and-flop" park flyer. Go-Go Dancer should not
be flown by a beginner R/C pilot.
Go-Go Dancer was designed to make motor battery changes as easy
as possible, with no tools required. You don't have to turn the
airplane over or remove the wing to change batteries. Just lift
the front battery hatch up and flip it forward for easy battery
access. The hatch is hinged in the front and small magnets hold
the hatch rear in place. The recommended motor for Go-Go Dancer
is the GoBrushless basic CD-ROM motor kit with 16 turns powered
by 2S1P - 640mAh LiPoly cells at 5 amps. A 6" x 4" prop
is recommended. This combination gives spectacular performance
and long flight times. Go-Go Dancer is light, yet tough. Go-Go
Dancer is a simple-to-build, fly-anywhere airplane that is one
of the best ways to get into brushless performance on a budget.
This kit features leading edge design and interlocking laser-cut
parts for exceptional fit, quality, and ease of construction.
The kit includes pushrods and connectors. The Go-Go Dancer plans
were drawn on a computer using professional design software. We
believe that the Go-Go Dancer plans are a work of art and continue
our high standards in kit manufacturing at ElectroFlying Models.
Easy-building engineering, great price, brushless performance
and great flying qualities, the Go-Go Dancer has it all.
The Go-Go Dancer laser-cut kit sells for
Click on the images above to download a PDF file of the 22 page
Go-Go Dancer Instruction Manual (2.2MB) or Go-Go Dancer Plan